| Item |
Offence |
Section |
Set Fine |
| 1. |
Fail to properly secure load on sides, end |
clause 5 (1) (a) |
$130.00 |
| 2. |
Fail to have required number of tiedowns |
clause 5 (1) (b) |
$130.00 |
| 3. |
Fail to secure load to prevent shift forward |
subsection 5 (3) |
$130.00 |
| 4. |
Fail to properly block or brace load on sides |
clause 5 (3) (a) |
$130.00 |
| 5. |
Use defective or damaged tiedown |
subsection 6 (4) |
$130.00 |
| 6. |
Fail to secure “over-the-centre” tiedown tensioner by adequate secondary means |
subsection 6 (5) |
$130.00 |
| 7. |
Fail to secure load – required by National Standard, Part 1 |
subsection 9 (1) |
$130.00 |
| 8. |
Use defective or damaged tiedown – contrary to National Standard, Part 1 |
subsection 9 (1) |
$130.00 |
| 9. |
Securement system fails to meet aggregate working load limit – required by National Standard, Part 1 |
subsection 9 (1) |
$130.00 |
| 10. |
Securement system fails to meet aggregate working load limit – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
$310.00 |
| 11. |
Fail to prevent load from rolling – required by National Standard, Part 1 |
subsection 9 (1) |
$130.00 |
| 12. |
Fail to prevent load from rolling – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
$310.00 |
| 13. |
Driver fails to ensure tiedowns taut – required by National Standard, Part 1 |
subsection 9 (1) |
$130.00 |
| 14. |
Driver fails to ensure tiedowns taut – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
$310.00 |
| 15. |
Fail to use adequate edge protector – required by National Standard, Part 1 |
subsection 9 (1) |
$130.00 |
| 16. |
Fail to use adequate edge protector – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg |
subsection 9 (1) |
$310.00 |
| 17. |
Fail to have proper number of tiedowns – required by National Standard, Part 1 |
subsection 9 (1) |
$130.00 |
| 18. |
Fail to properly secure load – required by National Standard, Part 2 |
subsection 9 (2) |
$310.00 |
| 19. |
Fail to properly secure load-required by National Standard, Part 2 – commercial motor vehicle over 4,500 kg |
subsection 9 (2) |
$310.00 |