Schedule 55.1
IT IS ORDERED, pursuant to the provisions of the Provincial Offences Act and the rules for the Ontario Court of Justice, that the amount set opposite each of the offences in the attached Items of Schedule 55.1 under the Provincial Statutes and Regulations thereunder is the Set Fine.
This Order comes into effect on the 15th day of April, 2005.
DATED AT TORONTO this 12th day of April, 2005.
ORIGINAL SIGNED BY:
Brian W. Lennox, Chief Justice
Ontario Court of Justice
| Item | Column 1 | Column 2 Section |
Set Fine |
|---|---|---|---|
| 1. | Fail to properly secure load on sides, end | clause 5 (1)(a) | $130.00 |
| 2. | Fail to have required number of tiedowns | clause 5 (1) (b) | $130.00 |
| 3. | Fail to secure load to prevent shift forward | subsection 5 (3) | $130.00 |
| 4. | Fail to properly block or brace load on sides | clause 5 (3) (a) | $130.00 |
| 5. | Use defective or damaged tiedown | subsection 6 (4) | $130.00 |
| 6. | Fail to secure “over-the-centre” tiedown tensioner by adequate secondary means | subsection 6 (5) | $130.00 |
| 7. | Fail to secure load – required by National Standard, Part 1 | subsection 9 (1) | $130.00 |
| 8. | Use defective or damaged tiedown – contrary to National Standard, Part 1 | subsection 9 (1) | $130.00 |
| 9. | Securement system fails to meet aggregate working load limit – required by National Standard, Part 1 | subsection 9 (1) | $130.00 |
| 10. | Securement system fails to meet aggregate working load limit – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg | subsection 9 (1) | $310.00 |
| 11. | Fail to prevent load from rolling – required by National Standard, Part 1 | subsection 9 (1) | $130.00 |
| 12. | Fail to prevent load from rolling – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg | subsection 9 (1) | $310.00 |
| 13. | Driver fails to ensure tiedowns taut – required by National Standard, Part 1 | subsection 9 (1) | $130.00 |
| 14. | Driver fails to ensure tiedowns taut – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg | subsection 9 (1) | $310.00 |
| 15. | Fail to use adequate edge protector – required by National Standard, Part 1 | subsection 9 (1) | $130.00 |
| 16. | Fail to use adequate edge protector – required by National Standard, Part 1 – commercial motor vehicle over 4,500 kg | subsection 9 (1) | $310.00 |
| 17. | Fail to have proper number of tiedowns – required by National Standard, Part 1 | subsection 9 (1) | $130.00 |
| 18. | Fail to properly secure load – required by National Standard, Part 2 | subsection 9 (2) | $310.00 |
| 19. | Fail to properly secure load-required by National Standard, Part 2 – commercial motor vehicle over 4,500 kg | subsection 9 (2) | $310.00 |